Showing all 11 results
Sale!
not rated
$149 $135
View
5 – Leaf Spring
- 45mm wide.
- 45mm thick.
- 640mm center of eye to center of eye.
- 4 springs needed per trailer.
- Best suited with the Dexter 33″ & Dexter 35″
- These springs are for electric brake systems only, this is a trailer that is under 4.5 tonne.
BAL Tyre Locking Wheel Chock
Fifth Wheel or RV Wheel Chock manufactured by Bal Products Div by Norco Industries.
Model #28000A
30″ Scissor Jacks (Pair)
- 30" Scissor Jacks for RV trailer stabilising.
- 32" (800mm) collapsed, 30″ (760mm) lift.
- Sold as a pair.
- Included is a crack handle with 3/4 drive
- Suitable for Fifth Wheel Levelling, Camper Trailer, RV stabilising.
- 24″ Scissor Jacks (Pair) also available.
Dexter EZ Flex – 33″ Axle Centres
The kit includes:
- 2 x rubberised rockers with 2 x grease nipples on each rocker – rubberised because both ends of the springs are fixed therefore jarring would occur if rocker was not rubberised – there would be no give.
- 8 x brass bushes (these bushes go inside the eyes on each leaf spring)
- 8 x shackle plates ½” thick (these are double the thickness therefore our bolts are longer) (the standard ½ U-bolt thread – electric brake system)
- 12 x greaseable bolts – grease nipples on each
- 2 x bolts for the centre rocker
- Numerous amounts of nuts
24″ Scissor Jacks (Pair)
- 26" (660mm) collapsed.
- 24" (610mm) lift.
- Sold as a pair.
- Included is a crack handle with 3/4 drive.
- 30″ Scissor Jacks (Pair) also available.
Sale!
not rated
$496 $396
View
Dexter 12″ Brake Drum 8 Stud
INSIDE DIAMETER: 12" x 2"
NUMBER OF STUDS: 8 x 9/16"-18
CAPACITY: 3,500 lbs. per drum
BEARING SIZE: 1-3/4" (25580) x 1-1/4" (14125A)
GREASE SEAL: 2.125" I.D. (010-001-00)
BOLT CIRCLE: 6-1/2" (165.1mm) PCD
Includes: 2 x bearings, wheel nuts, dust cap & bearing seal
Twin Compressor air brake kit
- Air brake kit to suit hydraulic braked vehicles including; F Trucks, Chev, RAM, tractors & light trucks.
- Popular with large 5th wheelers, gooseneck floats and plant trailers over 4.5t with air brakes.
- This kit converts hydraulic brake signal to a controlled air output for use with air braked trailers. This twin compressor is designed to suit larger boosters or triaxle trailers. The Kit is designed to utilise the existing park brake on the vehicle to apply / release the trailer air brakes.
- The main component of the kit is the hydraulic reaction valve as shown in pictures.
- Single Compressor air brake kit also available.
Proportional Brake Control
Suitable for trailers with up to 3 axles.
Applies trailer brakes in proportion to vehicles deceleration.
Flexible mounting control.
Green LED indicator monitors a secure connection with trailer.
Includes a "boost" feature that gives users the ability to apply more braking power.
Dexter EZ Flex – 35″ Axle Centres
- 2 x rubberised rockers with 2 x grease nipples on each rocker – rubberised because both ends of the springs are fixed therefore jarring would occur if rocker was not rubberised – there would be no give.
- 8 x brass bushes (these bushes go inside the eyes on each leaf spring)
- 8 x shackle plates ½” thick (these are double the thickness therefore our bolts are longer) (the standard ½ U-bolt thread – electric brake system)
- 12 x greaseable bolts – grease nipples on each
- 2 x bolts for the centre rocker
- Numerous amounts of nuts
Dexter Axle 12” Hub
- Suits 12" x 2" backing plates.
- 6 stud available.
- 8 stud available upon inquiry.