Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 16 × 15 × 5 cm |
Back to Wheel & Suspension Parts
Proportional Brake Control
$315
Suitable for trailers with up to 3 axles.
Applies trailer brakes in proportion to vehicles deceleration.
Flexible mounting control.
Green LED indicator monitors a secure connection with trailer.
Includes a “boost” feature that gives users the ability to apply more braking power.
Related products
Hydraulic Reaction Valve
- control pressure @ 6 bar: 60±10%
- medium: brake fluid
- hydr. control volume (cm3): 1.2
- control lever: flat
- lever hole(s): 1x7mm+1x8.5mm
- control pressure @ 6 bar: 60±10%
- medium: brake fluid
- hydr. control volume (cm3): 1.2
- control lever: flat
- lever hole(s): 1x7mm+1x8.5mm
Hayman Reese 3″ Centre Box
The 9464 Draw Tite 3" ball bolt-in kit is ideal for those building a custom tray.
Comes complete with Australian compliant 3" ball. Receiver box is compliant and rated at 4.5 tonne.
No chassis kit included.
92mm hole saw required.
435mm x 285mm surface. 70mm deep.
The 9464 Draw Tite 3" ball bolt-in kit is ideal for those building a custom tray.
Comes complete with Australian compliant 3" ball. Receiver box is compliant and rated at 4.5 tonne.
No chassis kit included.
92mm hole saw required.
435mm x 285mm surface. 70mm deep.
Dexter EZ Flex – 33″ Axle Centres
The kit includes:
- 2 x rubberised rockers with 2 x grease nipples on each rocker – rubberised because both ends of the springs are fixed therefore jarring would occur if rocker was not rubberised – there would be no give.
- 8 x brass bushes (these bushes go inside the eyes on each leaf spring)
- 8 x shackle plates ½” thick (these are double the thickness therefore our bolts are longer) (the standard ½ U-bolt thread – electric brake system)
- 12 x greaseable bolts – grease nipples on each
- 2 x bolts for the centre rocker
- Numerous amounts of nuts
The kit includes:
- 2 x rubberised rockers with 2 x grease nipples on each rocker – rubberised because both ends of the springs are fixed therefore jarring would occur if rocker was not rubberised – there would be no give.
- 8 x brass bushes (these bushes go inside the eyes on each leaf spring)
- 8 x shackle plates ½” thick (these are double the thickness therefore our bolts are longer) (the standard ½ U-bolt thread – electric brake system)
- 12 x greaseable bolts – grease nipples on each
- 2 x bolts for the centre rocker
- Numerous amounts of nuts
5 – Leaf Spring
- 45mm wide.
- 45mm thick.
- 640mm center of eye to center of eye.
- 4 springs needed per trailer.
- Best suited with the Dexter 33″ & Dexter 35″
- These springs are for electric brake systems only, this is a trailer that is under 4.5 tonne.
- 45mm wide.
- 45mm thick.
- 640mm center of eye to center of eye.
- 4 springs needed per trailer.
- Best suited with the Dexter 33″ & Dexter 35″
- These springs are for electric brake systems only, this is a trailer that is under 4.5 tonne.