Showing 1–12 of 14 results

Hayman Reese brand

Hayman Reese 3″ Goose Plate (ONLY)
Hayman Reese 3″ Goose Plate (ONLY)
This product is designed to improve clearance for dual cab utes. Using the same mounting rails, available in the Fifth Wheel Hitches range, the Dual Position Goose Plate is easily removable when not in use.
  • Rated to a maximum of 3500kg*
  • Please note that this is supplied with a 3″ ball solution
  • Ball centreline sits at 190mm above the truck bed
  • Ball can be positioned centrally between rails or 125mm rearward
  • Plate designed and made in Australia
  • Goose Plate suits 560mm (22") rail centers x 255mm (10") slot centers
  • Limited lifetime warranty
*Note: Do not exceed vehicle’s maximum towing capacity (Refer to vehicle’s owner’s manual) When not required for towing, the Dual Position Goose plate can easily be removed from the rails.
not rated $1,230 View
Pull Pin Service Kit
Pull Pin Service Kit
Pull Pin service kit is suitable for R16, R20, FWA7000H & 3" Goose Plate.
not rated $88 View
Toyota Land Cruiser 3″ Gooseneck Kit
Toyota Land Cruiser 3″ Gooseneck Kit
  • This product is designed to be attached to the chassis / underside of the tray.
  • The 3″ ball (included) can be removed when not in use, leaving the tray completely clear.
  • ADR Approved with compliance stickers.
  • Sold as either single or dual cab.
  • Limited lifetime warranty.
  • Suits standard height Toyota tray - minimum 380mm. See attached photo. *Note: Do not exceed vehicle’s maximum towing capacity (Refer to vehicle’s owner’s manual).
THIS ITEM IS SUITABLE TO TRAY VEHICLES ONLY.
not rated $3,399 View
Euro Fifth Wheel Hitch
Euro Fifth Wheel Hitch

Details

Featuring side-to-side pivot action to better accommodate hook-ups on uneven ground. Quick-easy installation, strong performance and easy removal in just seconds to allow full access to the truck bed.
  • Rated to 3.5tonne.
  • Two-jaw locking system
  • Fore-and-aft and side-to-side 44-5 degree pivot
  • Locking jaw handle
  • Vertically adjusts from 13-1/2" (330.2mm) to 17" (431.8mm)
  • Wide stance one-piece legs for improved stability
  • Includes rails & installation kit Kits available to suit Mazda BT50, Ford Ranger, Isuzu DMAX, Holden Colorado.
not rated $3,350 View
Bolt in 3″ Tow ball (32mm Shank)
Bolt in 3″ Tow ball (32mm Shank)
  • 75mm Long.
  • 32mm Shank.
  • ADR Approved, Australian compliant
  • Rated at 22.3 kN (approx 6 tonne)
  • Includes nut & washer.
not rated $265 View
Rear Position Low Level Leg
Rear Position Low Level Leg
The low level leg is targeted for people who use tray backed vehicles for towing. Since the tray generally sits higher than the typical tub, these legs help drop the hitch and level out the trailer whilst towing.
  • Rated to a maximum of 4500kg
  • Suits all Hayman Reese Rail based Fifth Wheel Hitches
  • Recommended for trays
  • Compared to the standard leg, the hitch will sit up to 85mm lower
  • Option to move the pivot point 114mm rearward
  • Note that the hitch cannot be fitted on lowest crossbeam hole
Please note these legs do not increase the maximum rating of the hitch product.
not rated $570 View
Rear Position High Level Leg
Rear Position High Level Leg
These leg options are there to optimise your fifth wheel hitch setup. Each fifth wheel setup will be different, based on the tow vehicle and trailer combination. Based on these differences you may need to use different legs to best position your fifth wheel hitch and ensure you have an optimum clearance when turning or to optimise the hitch skid plate height.
  • Suits all Hayman Reese rail based Fifth Wheel Hitches
  • Compared to the standard leg, the hitch will be positioned 125mm rearward
  • Note that the hitch cannot be fitted on lowest crossbeam holes
  • Rated to a maximum of 4500kg.
Please note these legs do not increase the maximum rating of the hitch product.
not rated $570 View
Ranger / BT-50 / Colorado 3″ Gooseneck Kit
Ranger / BT-50 / Colorado 3″ Gooseneck Kit
  • This product is designed to be attached to the chassis / underside of the tray.
  • With the product offering adjustable height brackets, it allows for fitment to many different trays.
  • Rated to a maximum of 3500kg.
  • ADR Approval stickers included within the kit.
  • 3" Ball can be removed when not in use.
  • Height adjustable to suit varying tray heights.
  • Sold as either a custom kit to suit your vehicle, or a universal kit.
  • Limited lifetime warranty.
  • Please note the vehicle you require the kit for. *Note: Do not exceed vehicle's maximum towing capacity (Refer to vehicle's owner's manual). Part number varies according to vehicle fitment.
THIS ITEM IS SUITABLE TO TRAY VEHICLES ONLY.  
not rated $3,399 View
Hayman Reese Gooseneck Kit (Tub)
Hayman Reese Gooseneck Kit (Tub)
This Gooseneck kit is designed to fit to a Ranger, D 'max, Colorado and Mazda BT-50. This kit includes a goose plate, 3" ball, chassis kit, floor rails, ADR approval stickers and instructions. Tray kits are available upon request. THIS ITEM IS SUITABLE TO TUB VEHICLES ONLY.
not rated $2,999 View
Bulldog BX1 Gooseneck 3″ Coupler Post (Offset)
Bulldog BX1 Gooseneck 3″ Coupler Post (Offset)
3" Coupler Post with 240mm coupling offset. ADR Approved and rated at 3.5 tonne. 115mm outer diameter mounting tube. https://www.youtube.com/watch?v=NsPLnjxBajo&t=3s  
not rated $1,390 View
Hayman Reese 3″  Centre Box
Hayman Reese 3″ Centre Box
The 9464 Draw Tite 3" ball bolt-in kit is ideal for those building a custom tray. Comes complete with Australian compliant 3" ball. Receiver box is compliant and rated at 4.5 tonne. No chassis kit included. 92mm hole saw required. 435mm x 285mm surface. 70mm deep.
not rated $1,230 View
30K Hayman Reese Hitch
30K Hayman Reese Hitch
The easy-to-use 30K Hayman Reese fifth wheel hitch has a large towing rating of 7 tonne! At Fifth Wheelers Australia we are able to give advice on your hitch, install and supply. Contact us to ensure this 30k Hayman Reese Hitch is suitable for your vehicle and Gooseneck RV. Read more about the 30K at haymanreese.com.au
not rated $3,530 View