Additional information
| Weight | .45 kg |
|---|---|
| Dimensions | 12 × 10 × 7 cm |
Back to Plumbing & Tanks
Camco Sewer Hose Twist Connect Kit with Clamps
$30
Connect two hoses – RV Sewer hose twist connect kit.
Kit contains 1x sewer hose adaptor, 1x RV sewer bayonet & 2x hose clamps
Suitable for 3″/76.2mm sewer hoses.
You may also like…
20′ Triple Wrap Sewer Hose
- Upgraded heavy duty 3"
- 20" extended length.
- Reduces to 8" in length.
- Can store in rear bumper.
- Does not come with fittings.
- Upgraded heavy duty 3"
- 20" extended length.
- Reduces to 8" in length.
- Can store in rear bumper.
- Does not come with fittings.
Valterra 3″ Bladex Waste Valve
- This waste valve can be adapted to pull handle.
- 2 x Seals and 4 x screws included within kit.
- 3" (7.62cm) waste valve.
- Valterra 1 1/2″ Waste Valve also available.
- This waste valve can be adapted to pull handle.
- 2 x Seals and 4 x screws included within kit.
- 3" (7.62cm) waste valve.
- Valterra 1 1/2″ Waste Valve also available.
Related products
Slide Out Stabilisers
Features: Stabilizer jacks for camper slide-outs
New folding handle allows jack to store in small compartments
Powder coated or zinc-plated parts resist corrosion
Adjusts between 20" and 46" Supports 5,000 lbs. per jackQuantity: 2 supports
1-Year limited warranty
Features: Stabilizer jacks for camper slide-outs
New folding handle allows jack to store in small compartments
Powder coated or zinc-plated parts resist corrosion
Adjusts between 20" and 46" Supports 5,000 lbs. per jackQuantity: 2 supports
1-Year limited warranty
Reese Revolution Pin Box
3500kg Tow Rating
800kg Maximum Pin Weight
Ideal for users requiring additional clearance
Typically used on short bed vehicles
Limited lifetime warranty
Please contact supplier to ensure this part is suitable to your vehicle
3500kg Tow Rating
800kg Maximum Pin Weight
Ideal for users requiring additional clearance
Typically used on short bed vehicles
Limited lifetime warranty
Please contact supplier to ensure this part is suitable to your vehicle
Dexter EZ Flex – 33″ Axle Centres
The kit includes:
- 2 x rubberised rockers with 2 x grease nipples on each rocker – rubberised because both ends of the springs are fixed therefore jarring would occur if rocker was not rubberised – there would be no give.
- 8 x brass bushes (these bushes go inside the eyes on each leaf spring)
- 8 x shackle plates ½” thick (these are double the thickness therefore our bolts are longer) (the standard ½ U-bolt thread – electric brake system)
- 12 x greaseable bolts – grease nipples on each
- 2 x bolts for the centre rocker
- Numerous amounts of nuts
The kit includes:
- 2 x rubberised rockers with 2 x grease nipples on each rocker – rubberised because both ends of the springs are fixed therefore jarring would occur if rocker was not rubberised – there would be no give.
- 8 x brass bushes (these bushes go inside the eyes on each leaf spring)
- 8 x shackle plates ½” thick (these are double the thickness therefore our bolts are longer) (the standard ½ U-bolt thread – electric brake system)
- 12 x greaseable bolts – grease nipples on each
- 2 x bolts for the centre rocker
- Numerous amounts of nuts
