Additional information
| Weight | 20 kg |
|---|---|
| Dimensions | 70 × 45 × 10 cm |
Back to Hayman Reese
Rear Position Low Level Leg
$675
The low level leg is targeted for people who use tray backed vehicles for towing. Since the tray generally sits higher than the typical tub, these legs help drop the hitch and level out the trailer whilst towing.
- Rated to a maximum of 4500kg
- Suits all Hayman Reese Rail based Fifth Wheel Hitches
- Recommended for trays
- Compared to the standard leg, the hitch will sit up to 85mm lower
- Option to move the pivot point 114mm rearward
- Note that the hitch cannot be fitted on lowest crossbeam hole
Please note these legs do not increase the maximum rating of the hitch product.
Related products
Dexter EZ Flex – 33″ Axle Centres
The kit includes:
- 2 x rubberised rockers with 2 x grease nipples on each rocker – rubberised because both ends of the springs are fixed therefore jarring would occur if rocker was not rubberised – there would be no give.
- 8 x brass bushes (these bushes go inside the eyes on each leaf spring)
- 8 x shackle plates ½” thick (these are double the thickness therefore our bolts are longer) (the standard ½ U-bolt thread – electric brake system)
- 12 x greaseable bolts – grease nipples on each
- 2 x bolts for the centre rocker
- Numerous amounts of nuts
The kit includes:
- 2 x rubberised rockers with 2 x grease nipples on each rocker – rubberised because both ends of the springs are fixed therefore jarring would occur if rocker was not rubberised – there would be no give.
- 8 x brass bushes (these bushes go inside the eyes on each leaf spring)
- 8 x shackle plates ½” thick (these are double the thickness therefore our bolts are longer) (the standard ½ U-bolt thread – electric brake system)
- 12 x greaseable bolts – grease nipples on each
- 2 x bolts for the centre rocker
- Numerous amounts of nuts
Fifth Wheel Lube Plate
Provides a buffer between a 5th wheel hitch and kingpin
Easily fits on any standard kingpin
Reduces normal wear and tear when towing
Eliminates messy grease deposits on hitch plate
Constructed from tough polyethylene
Provides a buffer between a 5th wheel hitch and kingpin
Easily fits on any standard kingpin
Reduces normal wear and tear when towing
Eliminates messy grease deposits on hitch plate
Constructed from tough polyethylene
Landing Leg Motor/ Gear Box
- 12V DC , 30 AMP.
- Electric motor/ gear box for landing leg
- This product suits the Lippert landing legs.
- Includes 2 mounting bolts.
- Typically found on USA built Fifth Wheelers.
- Does not include Switch
- Please note this is a sample photo
- 12V DC , 30 AMP.
- Electric motor/ gear box for landing leg
- This product suits the Lippert landing legs.
- Includes 2 mounting bolts.
- Typically found on USA built Fifth Wheelers.
- Does not include Switch
- Please note this is a sample photo